Sale!

1.1 SpeedBox 1.1 for Bosch- Smart System

Original price was: $469.90.Current price is: $425.50.

Available on back-order

SKU: SpeedBox 1.1 for Bosch -Smart System Category:

Description

SpeedBox 1.1 for Bosch- “Bosch Smart System”

 They developed SpeedBox 1.1 for Bosch compatible with Bosch Smart System.

The tuning for e-bikes with the newest Bosch Gen4 motor and Smart System

SpeedBox 1.1 for Bosch enables you to suppress the speed limiter on your e-bike.

If you want to see correct speed and all riding data during your ride, we recommend choosing SpeedBox 1.1 B.Tuning for Bosch – you can see the real values in our SpeedBox App – right on the display of your phone.

How does SpeedBox 1.1 for Bosch work?

To activate all the functions of the SpeedBox correctly, it is necessary to enter the menu after the first switching on of the e-bike after the tuning installation and switch to the circumference of the wheel of your e-bike.

Activate/deactivate the tuning before the ride (when the e-bike is standing still), not during riding!

You will activate the SpeedBox 1.1 tuning directly on your e-bike’s control unit by activating the WALK assist function shortly (holding down the “” button). Your e-bike display will show a value of 3.5 km/h (2.2 mph) and from now on you will be able to ride up to 35 km/h. You may change the default speed limit to any limit you want (up to 99 kph), however, to minimize the risk of error codes, we recommend not to exceed 35 km/h.

To deactivate the tuning, activate the WALK assist function shortly again (by holding down the “” button). Your e-bike display will show a value of 2.5 km/h (1.6 mph) and the speed limit will be reset to 25 km/h. Your e-bike will then work the same as before the tuning installation.

SpeedBox was also designed for e-bikes that do not have the WALK assist function enabled, or activated. In this case, you can activate/deactivate tuning by switching between two assistance modes twice, i.e. by pressing the – + – + buttons.

You can set the maximum speed limit by switching the modes from TURBO mode three levels down and then three levels up: eMTB – TOUR+ – ECO – TOUR+ – eMTB – TURBO. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by activating/deactivating WALK assist function shortly or by turning the rear wheel 360°. The value of 2.5 km/h on the display corresponds with the limit of 25 km/h, 3.0 corresponds with 30 km/h, 3.5 corresponds with 35 km/h etc. The last displayed limit will be saved after 15 seconds of inactivity.

After finishing the ride, leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed. Then it is safe to turn off your bike and you can start looking forward to your next trip. Do not remove the display to lock the e-bike until SpeedBox finishes the “countdown” process.

 

PROPERTIES:
Activation: WALK/ + – + –
Maximum speed: 50 km/ h
Indication of tuning activation/deactivation: YES (2,5/9,9 km/h)
Display shows:
readable actual speed
correct travelled distance (after the countdown process is
finished)
Compatible with:
displays KIOX 300
motors Bosch Gen4
motors Bosch Smart System
Not compatible with e-bikes that have a magnet attached to a valve (Bosch Rim Magnet)

The tuning chip for e-bikes with the newest Bosch Gen4 motor and Smart System.

SpeedBox 1.1 enables you to suppress the speed limiter on your e-bike. When in use, the display shows the real speed up to 22.2 km/h. After exceeding this speed your actual speed is indicated on the last two digits of the display.

Example:

– 22.3 corresponds to a speed of 23 km/h

– 23.1 corresponds to a speed of 31 km/h

If you want to see correct speed and all riding data during your ride, we recommend choosing SpeedBox 1.0 B.Tuning for Bosch – you can see the real values in our SpeedBox App – right on the display of your phone.

or by setting off, so it does not restrict the use of your e-bike in any way. However, you still need to have the countdown process run regularly to prevent tuning detection.

Assembly

We use original connectors for the production of SpeedBox chips ensuring that the installation process is very simple and the chip is connected properly. We have also prepared detailed instructions and videos to make installation easy for you. Disassembly of the tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.

If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.

Important:

Connect the male – female connectors in the direction of the lock. Do not rotate the connectors during connection!

Manual:

Download manuals: textgraphic

Warning

Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.

We strongly recommend using other safety features and protective gear to prevent injuries.

In case of updating the software of your e-bike, we recommend the following procedure:

1) Uninstall SpeedBox from the e-bike

2) Update the software

3) Reinstall SpeedBox

Print Friendly, PDF & Email

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.