Description
To turn off the tuning, simply enable the WALK assist feature briefly once more. A speed of 2.5 km/h (1.6 mph) will be displayed on your screen and the speed restriction will be restored to 25 km/h. Your electric bike will resume its original functionality prior to the tuning modification.
SpeedBox was created for e-bikes lacking a traditional control unit featuring a WALK assist feature. In such instances, users can activate SpeedBox by simply pressing the + – + – buttons. Deactivating SpeedBox is just as simple using the same method.
You can adjust the top speed of an electric bike by selecting different modes: Turbo, EMTB, Tour, Eco, Tour, EMTB, Turbo. Once you choose a mode, the specific speed limit will be shown. To change the maximum speed, you can activate the WALK assist briefly or rotate the rear wheel 360°. For example, on the display, 1.5 km/h corresponds to a limit of 15 km/h, 2 km/h to 20 km/h, 2.5 km/h to 25 km/h, and so on. The last speed limit displayed will be saved automatically after 5 seconds of no activity.
When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.
Assembly
When connecting the SpeedBox to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the tuning is activated.
Detailed installation information can be found here.
Warning
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injurie
Check out the Buyers Guide below to ensure you get the right for you Bosch powered ebike
SpeedBox 3.0 for Bosch is the 3rd generation of our tuning models. This generation shows the real values in km h on the e-bike display and also allows you to set your own maximum speed limit.
Would you like to keep track of your rides? Check out our SpeedBox 3.0 B.Tuning for Bosch, SpeedBox 2.0 B.Tuning for Bosch and SpeedBox 1.0 B.Tuning for Bosch models with Bluetooth – they not only remove the speed limit and show the real values, but they can also pair your e-bike with our SpeedBox App.
With SpeedBox you won’t be limited to the speed of 25 km/h anymore. You can freely enjoy the maximum power of your electric bike, limited only by your pedaling frequency.
SpeedBox 3.0 for Bosch and SpeedBox 2.0 for Bosch are reliable tuning chips, which completely eliminate the speed limit of 25 km/h with real values in km/ h shown on the bike’s display. On top of that, SpeedBox 3.0 for Bosch enables setting the speed limit of our own choice.
We have recently developed SpeedBox 1.0 for Bosch compatible with Bosch Smart System.
Do you want something even cooler? Check out our SpeedBox 3.0 B.Tuning for Bosch, SpeedBox 2.0 B.Tuning for Bosch and SpeedBox 1.0 B.Tuning pro Bosch models with Bluetooth – they not only remove the speed limit and show the real speed, but they can also pair your e-bike with our SpeedBox App.
If you’re not certain about which one to choose, you can use our simple Buyer’s Guide.
SpeedBox products are thoroughly tested and we stand behind their quality. We provide lifelong warranty to all our products.
| SpeedBox Model | Compatible Drive | Compatible Generation | Bluetooth & SpeedBox App Compatibility | Max Speed | Speed Limit Settings | Real Values | Motor Lock | Invisible Mode | Bike & Trip Data Analysis |
|---|---|---|---|---|---|---|---|---|---|
| SpeedBox 1.0 B.Tuning (Smart System) | Performance Line CX (The Smart System) | Gen 4 |  | Approx 60 kph | | (in App only) |  | | |
| SpeedBox 1.0 (Smart System) | Performance Line CX (The Smart System) | Gen 4 | | Approx 60 kph | | (last two digits x 10) | | | |
| SpeedBox 3.0 B.Tuning (incl. Gen4) | Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line Speed, Performance Line CX | Gen 2, 3, 4 | | Unlimited | | | | | |
| SpeedBox 3.0 (incl. Gen4) | Active Line, Active Line Plus, Cargo Line, Performance Line, Performance Line Speed, Performance Line CX | Gen 2, 3, 4 | | Unlimited | | | | | |
| SpeedBox 2.0 B.Tuning (excl. Gen4) | Active Line, Active Line Plus, Performance Line, Performance Line CX | Gen 2(till 2020), 3(till 2020) | | Unlimited | | | | | |
| SpeedBox 2.0 (excl. Gen4) | Active Line, Active Line Plus, Performance Line, Performance Line CX | Gen 2(till 2020), 3(till 2020) | | Unlimited | | | | | |
EBike Tuning with Bosch Drive Designed and was released Jan 2020 Available in New Zealand Now
Why pay more to import costs from Czech Republic Europe with mail delays or expensive DHL shipping costs.
Special reduced Winter-Summer price NZ$359.90 “WHY PAY ALLOT MORE”??? “In stock now ”
SpeedBox 3.0 for Bosch
PROPERTIES:
Speed limiter: deactivated
Display shows: actual values
Compatible with motors: Active Line, Active Line Plus, Performance Line and Performance Line CX Line including motors of the 4th generation.
Activation: by pressing WALK / + – + –
Compatible with SpeedBox App: NO
Product code: SB3_B_1pcs_BOX
A smart chip of the third generation with an option to set a speed limit of an e-bike.
SpeedBox 3.0 tuning chip enables to select speed limit of your own choice. After the chip is installed, your e-bike’s display will show real data, such as maximum and average speeds, daily mileage and cruising range.
How does SpeedBox 3.0 work?
The tuning kit can be activated directly on your bike’s display. After pressing the WALK button, a value of 9.9 km/h (6.2 mph) is displayed and from now on you will be able to ride at a speed of 40 km/h, 50 km/h and even more than 60 km/h.
To deactivate the tuning kit, press the WALK button again. The value of 2.5 km/h (1.6 mph) will appear on your display and the speed limit will reset to 25 km/h. Your e-bike will then work the same as before installation of the chip.
SpeedBox was also designed for e-bikes that do not have a classic control unit with Walk button. In this case you can just use the combination of + – + – buttons and SpeedBox will be activated. You can easily deactivate SpeedBox in the same way.
You can set the maximum speed of an electric assistance by changing modes: Turbo – Sport – Tour – Eco – Tour – Sport – Turbo. An actual speed limit will be displayed after that. The maximum speed of an electric assistance can be switched by pressing WALK button shortly or by turning the rear wheel 360°. The value of 1,5 km/h on the display corresponds with the limit of 15 km/h, 2 km/h corresponds with the limit of 20 km/h, 2,5 corresponds with 25 km/h, 3,0 corresponds with 30 km/h, 9,9 corresponds with 99 km/h etc. The last displayed limit will be saved after 5 seconds of inactivity.
When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.
Assembly
When connecting the SpeedBox chip to an e-bike you will find connectors colored to make installation very simple. We have prepared detailed instructions and videos to make installation easy for you. Disassembly of our tuning chip is just as easy. If you have any troubles with installation or disassembly, do not hesitate to contact us.
If you are planning to install SpeedBox on a brand-new bike, make sure you ride it for at least 1 km before the chip is activated.
Warning
Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use SpeedBox products. Electric bikes equipped with SpeedBox products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with SpeedBox products can be used exclusively on private property and entirely at one’s own risk. The use of SpeedBox may void the warranty of your ebike.
We strongly recommend using other safety features and protective gear to prevent injuries in higher sp
Comparison of speedbox for Bosch 2.0 to 3.0
Brand New SpeedBox 3.0 Tuning Kit. Released on 1th of January 2020! Compatible with all Bosch 2014 – 2020 motors!
“Absolutely brilliant! took the bike out today and it’s like a motocross bike ” by George
Compatible with motors: Active Line, Active Line Plus, Performance Line and Performance Line CX, including motors of the 4th generation.
When using SpeedBox 3.0 with Bosch motors of the 4th generation (produced in 2020 or later) it is necessary to leave the bike on after finishing the ride until a value of 0.0 km/h is displayed. During this process the remaining time will be displayed in minutes. Then it is safe to turn off your bike and you can start looking forward to your next trip.
This tuning kit is compatible with all eBikes; eMTB; eMountainBikes that have a Bosch Motor manufactured from 2014-2020. Including all Active Line, Active Line Plus, Performance Line and Performance Line CX models including motors of the 4th generation.
We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds.
Hi Colin,
let your customer watch our installation videos:
https://www.speedbox-tuning.
Pls find attached picture.
1st and 3rd connector from left is meant for LIGHTS.
2nd and 4th connector from left is meant for SPEEDBOX.
To set up the speed limit on SB3.0 for Bosch only.
Spin the back wheel and it will increase by 5kp increments
Then stop wheel spinning when you reach the limit you want.
So if its already on 9.9 (99kph) you can reset this way.
Reviews
There are no reviews yet.